The High Rail Gantry features the Aquavision®Di industrial PC controller.
The powerful and flexible AquaVision®Di Controller features an open architecture design that gives operators the freedom to fine-tune programs from any CAD/CAM/nesting software, utilizing advanced HMI features and/or standard G&M code.
The High Rail Gantry's full-featured hand-held pendant lets waterjet operators get closer to their work.
Industry leading precision and accuracy: Closed loop drive system on X & Y Axis; AC brushless servo motors, absolute encoders, SERCOS; Preloaded anti-backlash recirculating ball screws THK linear bearings with hardened precision ground ways; Split Y-axis drive system (dual motors).
The High Rail Gantry can be equipped with multiple cutting heads and pneumatic drills to meet demanding throughput requirements.
As many as 12 waterjet or abrasivejet cutting heads can be added to a High Rail Gantry system.
This High Rail Gantry waterjet cutting system features dual 5-axis abrasivejet cutting heads and a pneumatic drill to pre-pierce material sensitive to delamination.
This massive 10'x24' High Rail Gantry at Stainless Steel Technology in Lively, Ontario, is one of the largest waterjets in Canada.
The High Rail Gantry is easy to load with a forklift or crane.
For optiminal performance, add an abrasive removal, closed loop filtration system and chiller to your High Rail Gantry waterjet system.
Spreader bars support multiple cutting heads and drills.
YOXO® added a shuttle to their High Rail Gantry so they can continue cutting parts while they unload their waterjet table.
Cutting 5/8 (.625") MIC6 Aluminum, P/N Controlled Air Intake, Tolerance ± .005". Productivity is quadrupled with four cutting heads! Photo Courtesy Pegasus Northwest, Inc.
Cutting 6.5" titanium billets for Boeing. The material is forged into its current configuration, then waterjet cut (leaving .250" excess) and machined to its finished shape. Productivity is doubled by using two cutting heads. Photo courtesy Pegasus Northwest.
David Allen Company's conference table features 1,500 intricate pieces of stone and stained glass that were cut on their Jet Edge High Rail Gantry. Notice the detail in the peacock's eye. This was cut on the Jet Edge!
Stainless steel 1/2" thick baffle with 6,800 holes +/- .005" made for a heat exchanger. Courtesy Arro-Jet Engineering and Consulting
The High Rail Gantry opens the work envelope for easier access and the overhead design raises critcal components out of the processing enviornment. The isolated motion system and ridgid steel beams make this the most accurate waterjet cutter on the market. With 3-axis and 5-axis cutting options, multi-table sizes and a Jet Edge UHP Pump, you're prepared to cut some serious volume.
Jet Edge is one of the few waterjet manufacturers willing to custom engineer solutions so you receive a system manufactured to satisfy your specific requirements. Our willingness to customize has made us the go-to waterjet supplier for solving the world’s toughest waterjet problems.
Call us today to discuss a custom solution for your manufacturing challenge!
1-800-JET-EDGE | + 1 763-497-8700
Every Jet Edge water jet system includes unlimited lifetime hands-on training at Jet Edge’s state-of-the art training lab. Training is free when taken at Jet Edge’s headquarters. You also can arrange to have training at your facility for a fee.
Register for classes online or call 1-800-JET-EDGE (538-3343) or +1 763-497-8700 to schedule custom training sessions for your business. You must be a Jet Edge customer to be eligible for training.
The High Rail Gantry Waterjet System can be powered by any Jet Edge precision waterjet pump. Jet Edge offers the widest range of waterjet pumps in the industry.
AQUAVISION® DI CONTROLLER
WATERJET PARTS AND ACCESSORIES
Jet Edge offers a wide range of waterjet parts and accessories to complete your waterjet system, from cutting heads and abrasive delivery systems to closed loop water filtration and abrasive removal systems.
WATERJET SHUTTLE SYSTEMS
Jet Edge can incorporate custom shuttles into your water-only waterjet cutting system so you can keep cutting as parts are unloaded.