Every Jet Edge water jet system includes unlimited lifetime hands-on training. Water jet training is free when taken at Jet Edge’s headquarters. You also can arrange to have training at your facility for a fee.
Register for classes online or call 1-800-JET-EDGE to schedule custom training sessions for your business.
You must be a Jet Edge customer to be eligible for training.
Current Classes
Jet Edge Service Maintenance & Safety Training May
Jet Edge is pleased to offer a series of hands-on training programs for operators and maintenance personnel on Jet Edge products.
Each session is held at Jet Edge Training Center in Saint Michael, Minnesota.
Participants are encouraged to wear work/casual clothing and safety shoes are required. Class sizes are limited to ten (10) participants.
If the class is full, we ask that you select an alternate date. Registration for all classes is two weeks prior to the start date. Class times are 8:30 AM - 4:30 PM daily.
DAY ONE
Safety
- Considerations
- Hearing & eye protection
- High pressure water injuries
- LOTO
Systems Overview
- Incoming water
- Hydraulics
- Cooling water
- HIgh pressure water
- Electical controls (Basics/Advanced)
Intensifiers
- High pressure seal replacement
- Check valve repair
- Hydraulic seal replacement
DAY TWO
Intensifiers
Waterjet Assembly Repair/Troubleshooting
- Bleed down valve repair
- Swivel Repair (plumbing)
- Omnijet repair
- Permalign repair
Repair, Maintenance & Troubleshooting of Machine
- Discussion - preventive maintenance
- Discussion - typical repair steps
- Discussion - proper troubleshooting techniques
DAY THREE
Quiz
Review Quiz & Question
(If applicable) Table Maintenance
- Lubrication
- Checking mechanical components for wear
Special Applications
- Cleaning swivels
- Mobile tools
- Open for customer requests
Jet Edge Service Maintenance & Safety Training July
Jet Edge is pleased to offer a series of hands-on training programs for operators and maintenance personnel on Jet Edge products.
Each session is held at Jet Edge Training Center in Saint Michael, Minnesota.
Participants are encouraged to wear work/casual clothing and safety shoes are required. Class sizes are limited to ten (10) participants.
If the class is full, we ask that you select an alternate date. Registration for all classes is two weeks prior to the start date. Class times are 8:30 AM - 4:30 PM daily.
DAY ONE
Safety
- Considerations
- Hearing & eye protection
- High pressure water injuries
- LOTO
Systems Overview
- Incoming water
- Hydraulics
- Cooling water
- HIgh pressure water
- Electical controls (Basics/Advanced)
Intensifiers
- High pressure seal replacement
- Check valve repair
- Hydraulic seal replacement
DAY TWO
Intensifiers
Waterjet Assembly Repair/Troubleshooting
- Bleed down valve repair
- Swivel Repair (plumbing)
- Omnijet repair
- Permalign repair
Repair, Maintenance & Troubleshooting of Machine
- Discussion - preventive maintenance
- Discussion - typical repair steps
- Discussion - proper troubleshooting techniques
DAY THREE
Quiz
Review Quiz & Question
(If applicable) Table Maintenance
- Lubrication
- Checking mechanical components for wear
Special Applications
- Cleaning swivels
- Mobile tools
- Open for customer requests
Jet Edge Service Maintenance & Safety Training September
Jet Edge is pleased to offer a series of hands-on training programs for operators and maintenance personnel on Jet Edge products.
Each session is held at Jet Edge Training Center in Saint Michael, Minnesota.
Participants are encouraged to wear work/casual clothing and safety shoes are required. Class sizes are limited to ten (10) participants.
If the class is full, we ask that you select an alternate date. Registration for all classes is two weeks prior to the start date. Class times are 8:30 AM - 4:30 PM daily.
DAY ONE
Safety
- Considerations
- Hearing & eye protection
- High pressure water injuries
- LOTO
Systems Overview
- Incoming water
- Hydraulics
- Cooling water
- HIgh pressure water
- Electical controls (Basics/Advanced)
Intensifiers
- High pressure seal replacement
- Check valve repair
- Hydraulic seal replacement
DAY TWO
Intensifiers
Waterjet Assembly Repair/Troubleshooting
- Bleed down valve repair
- Swivel Repair (plumbing)
- Omnijet repair
- Permalign repair
Repair, Maintenance & Troubleshooting of Machine
- Discussion - preventive maintenance
- Discussion - typical repair steps
- Discussion - proper troubleshooting techniques
DAY THREE
Quiz
Review Quiz & Question
(If applicable) Table Maintenance
- Lubrication
- Checking mechanical components for wear
Special Applications
- Cleaning swivels
- Mobile tools
- Open for customer requests
Jet Edge Service Maintenance & Safety Training November
Jet Edge is pleased to offer a series of hands-on training programs for operators and maintenance personnel on Jet Edge products.
Each session is held at Jet Edge Training Center in Saint Michael, Minnesota.
Participants are encouraged to wear work/casual clothing and safety shoes are required. Class sizes are limited to ten (10) participants.
If the class is full, we ask that you select an alternate date. Registration for all classes is two weeks prior to the start date. Class times are 8:30 AM - 4:30 PM daily.
DAY ONE
Safety
- Considerations
- Hearing & eye protection
- High pressure water injuries
- LOTO
Systems Overview
- Incoming water
- Hydraulics
- Cooling water
- HIgh pressure water
- Electical controls (Basics/Advanced)
Intensifiers
- High pressure seal replacement
- Check valve repair
- Hydraulic seal replacement
DAY TWO
Intensifiers
Waterjet Assembly Repair/Troubleshooting
- Bleed down valve repair
- Swivel Repair (plumbing)
- Omnijet repair
- Permalign repair
Repair, Maintenance & Troubleshooting of Machine
- Discussion - preventive maintenance
- Discussion - typical repair steps
- Discussion - proper troubleshooting techniques
DAY THREE
Quiz
Review Quiz & Question
(If applicable) Table Maintenance
- Lubrication
- Checking mechanical components for wear
Special Applications
- Cleaning swivels
- Mobile tools
- Open for customer requests
Mobile Waterjet Equipment Maintenance Training
To request a class, please call 763-497-8700, Ext. 744
The following is an outline for a typical two day, in-house training seminar for the mobile equipment product line. Note: Casual clothing and safety shoes are recommended attire for this hands-on training.
DAY 1
SAFETY
-General Safety Considerations
-Hearing/Eye Protection
-High Pressure Procedures
POWER UNIT OVERVIEW
-Electrical Diagrams
-Hydraulic Diagrams
-Hydraulic Fluid Selection
-High Pressure Water
INTENSIFIERS
-Interface oil/water
-Seal Installation
-Poppet Installation
-Bleed Down Valve
ELECTRIC MOTOR
DIESEL ENGINE MAINTENANCE
DAY 2
HAND TOOLS & ACCESSORIES
-Overview
-Manifold/Orifice Selection
-Rebuilding
GENERAL CONSIDERATIONS
-Coning & Threading Tubing
-Use of Stainless Steel Attachments
-High Pressure Hose
QUIZ
QUESTIONS & REVIEW
Webinars Archive
Watch a recording of our recent webinar to learn how to get the most out of your precision waterjet cutting system!
Topics include nesting, height sensing, mirroring, pump selection,...