Eco-Jet® PTO Waterjet Pump

55,000 psi (3800 bar) Continuous Operating Pressure
30 hp, 0.9 gpm (3.4 lpm) Maximum Flow Rate
Use your tractor's PTO to power a waterjet pump!

An industry-first, the Eco-Jet PTO utilizes a tractor* PTO to produce up to 0.9 gpm of 55,000 psi ultra-high pressure (UHP) water for precision cutting, cleaning and surface preparation applications.
Unlike traditional industrial waterjet pumps, the Eco-Jet PTO requires only a standard 120 V 60 Hz power source and a suitable tractor, making it practical for farm machine shops and shops with a limited power supply.
  • Highly Affordable
  • Uses Standard Household Power
  • Available for 540 rpm and 1000 rpm PTO
  • Available for Category 1 and 2 Three-Point Hitches
  • Easy to maintain
  • Powers any manufacturer’s waterjet system!**
* Tractor Sold Separately
** Waterjet table or tool must be capable of sending a
pressure relief signal to the pump.


  • Power: 540 rpm and 1000 rpm PTO producing a minimum of 50 hp
  • Output Pressure: 55,000 psi (3800 bar) continuous
  • Flow Rate: 0.9 GPM (3.4 L/min)
  • Maximum Orifice: .015 in (.38 mm)
  • Power Supply: 120 V 60 Hz
  • LWH: 35.75 inch x 39.54 inch x 35.43 inch (1004 mm x 908 mm x 900 mm)
  • Weight: 580 lb (263 kg); approximate

Standard Features

  • Attenuator to reduce pressure fluctuations
  • Liquid-filled pressure gauges
  • UHP safety shielded tubing


  • Rugged all-steel welded framework
  • NEMA 12/13 rated electrical enclosure

Environmental Requirements

  • Temperature: Above freezing to 95ºF (0º-35ºC)
  • Relative Humidity: Non condensing, maximum 95% at 95ºF (35ºC)

Tractor Requirements

  • 540 rpm or 1000 rpm PTO producing a minimum of 50hp
  • Category 1 or 2 Three-Point Hitch  
Low-Pressure Water Requirements
  • Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
  • Supply Requirements:
    Feed Water: 4.5 to 5 GPM (17-19 lpm)
    Minimum pressure 60 psi (4.2 bar)
    Maximum temperature 70ºF (21ºC)
  • On-board filtration to 0.45 micron

* Tractor Sold Separately

** Waterjet table or tool must be capable of sending a pressure relief signal to the pump. 

Specifications subject to change.


Jet Edge is one of the few waterjet manufacturers willing to custom engineer solutions so you receive a system manufactured to satisfy your specific requirements. Our willingness to customize has made us the go-to waterjet supplier for solving the world’s toughest waterjet problems.

Call us today to discuss a custom solution for your manufacturing challenge!
1-800-JET-EDGE | 763-497-8700


Every Jet Edge system includes unlimited lifetime hands-on training at Jet Edge’s state-of-the art training lab. Training is free when taken at Jet Edge’s headquarters. You also can arrange to have training at your facility for a fee.

Register for classes online or call 1-800-JET-EDGE (538-3343) or +1 763-497-8700 to schedule custom training sessions for your business.

You must be a Jet Edge customer to be eligible for training.