55,000 psi (3800 bar) Continuous Operating Pressure
30 hp, 0.9 gpm (3.4 lpm) Maximum Flow Rate
- Energy-efficient and eco-friendly
- Uses up to 40% less electricity than a 50 hp hydraulic intensifier pump, but produces same output!
- Economically priced without sacrificing quality.
- Easy to maintain.
- Powers any manufacturer’s waterjet system!*
* Waterjet table or tool must be capable of sending a pressure relief signal to the pump.
- Power: 30HP (22kw)
- Output Pressure: 55,000 psi (3800 bar) continuous
- Flow Rate: 0.9 GPM (3.4 L/min)
- Power Supply: 3-Phase, 460 VAC (60Hz), 35AMP
- LWH: 51 inch x 34 inch x 41 inch (1300 mm x 870 mm x 1050 mm)
- Weight: 1500 lb (680 kg); approximate
- High-efficiency TEFC motor
- 1800 nominal motor speed (rpm)
- User serviceable attenuator to reduce pressure fluctuations
- Liquid-filled pressure gauges
- UHP safety shielded tubing
- UL listed industrial control panel
- Automatic safety pressure relief valve
- Automatic safety pressure bleed-down valve to relieve pressure from system.
- Integrated power distribution panel with system disconnect
- On-board pressure booster to ensure adequate water supply pressure
- Rugged all-steel welded framework
- NEMA 12/13 rated electrical enclosure
- Ambient Room Temperature: 50°–95° F (10°–35° C)
- Relative Humidity: Non condensing, maximum 95% at 95ºF (35ºC)
- Motor Output: 30 hp (22 kw)
- Motor Type: High Efficiency TEFC electric motor
- Full load current: 35A @460VAC (60 Hz)
50A @380VAC (50 Hz)
70A @230 VAC (60 Hz)
- Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
- Supply Requirements:
Coolant Water: 4 GPM (19 lpm)
Feed Water: 4.5 to 5 GPM (17-19 lpm)
Minimum pressure 60 psi (4.2 bar)
Maximum temperature 70ºF (21ºC)
- On-board filtration to 0.45 micron
Jet Edge is one of the few waterjet manufacturers willing to custom engineer solutions so you receive a system manufactured to satisfy your specific requirements. Our willingness to customize has made us the go-to waterjet supplier for solving the world’s toughest waterjet problems.
Call us today to discuss a custom solution for your manufacturing challenge!
1-800-JET-EDGE | 763-497-8700
Every Jet Edge system includes unlimited lifetime hands-on training at Jet Edge’s state-of-the art training lab. Training is free when taken at Jet Edge’s headquarters. You also can arrange to have training at your facility for a fee.
Register for classes online or call 1-800-JET-EDGE (538-3343) or +1 763-497-8700 to schedule custom training sessions for your business.
You must be a Jet Edge customer to be eligible for training.