The Mid Rail Gantry utilizes Jet Edge's powerful Aquavision® Di industrial PC controller.
The Aquavision® Di Controller is the most advanced waterjet motion controller in the industry. Its customized Visual Basic front end guides the user through the process from job set-up to production.
The Mid Rail Gantry includes a full-featured hand-held pendant for waterjet operator convenience.
The Mid Rail Gantry features AC digital brushless servo motors, absolute encoders, SERCOS communication platform.
A ball bar test from Mid Rail Gantry illustrates its accuracy.
Motion components are protected with metal covers, brush and lip seals and blower fans.
Close up of 3/4" bi-metallic ballistic armor plate waterjet cut on a Mid Rail Gantry. Courtesy Pacific Ship Repair & Fabrication.
Reuel Inc. uses its Mid Rail Gantry waterjet to cut insulating components from GP03 fiberglass. Waterjet is the most effective way to cut this material because other cutting methods produce a fine abrasive dust that damages other shop equipment.
1/4" thick #304 stainless steel screw conveyor trough flanges and round inlet and discharge flanges. Anderson-Crane Company tightly nests these parts on their Mid Rail Gantry. The parts go straight from the waterjet table to the welding production line with no cleanup in between required. Photo courtesy Anderson-Crane Company
Precision Waterjet Concepts mirror cuts large parts on its Mid Rail Gantry waterjet system. This enables them to cut large parts twice as fast. Courtesy Precision Waterjet Concepts
The 11th Armored Calvary Regiment is increasing operational readiness with a Jet Edge Mid Rail Gantry. Their waterjet system is operated by the Service & Recovery Section of the regiments Maintenance Troop, Regimental Support Squadron (RSS). Pictured from front to rear (left to right): SGT Hardin, SPC Tucker, SPC Barlow, SGT Stanger, CW2(P) Ash, SPC Millbank, SPC Hodge, PFC Adams, SGT Bouknight, SGT Lemberg, SPC Stokes, SPC Roberts, SPC Beauchemin, PFC Sheldon, SGT Rodriguez. Photo courtesy U. S. Army - 11th Armored Calvary Regiment.
This 5'X8' Mid Rail Gantry system features one abrasivejet cutting head and an abrasive removal system. Abrasive removal systems automatically remove spent garnet from the waterjet catch tank, reducing downtime for tank clean out. The Mid Rail Gantry is available in many sizes, 5'X5' to 24'X13'.
The Mid Rail Gantry waterjet system is available in a wide range of sizes, from 5'x5' (1500 mm x 1500 mm) to 24'x13' (7300 mm x 3900 mm).
Capable of cutting complex parts from virtually any material, this workhorse water jet system is designed to provide years of dependable service in harsh industrial environments. Its sturdy design separates the motion system from the catcher tank, eliminating vibration and ensuring maximum part quality. The Mid Rail Gantry supports multiple cutting heads and can be powered by any Jet Edge waterjet pump.
The Mid Rail Gantry utilizes the Aquavision® Di industrial PC controller. It is ball-screw driven for optimal precision and features direct-couple AC brushless digital servo motors and single or double carriages. Critical bearing components are protected with heavy metal covers with brush seals and positive air pressure.
Optional mirroring capabilities make it possible to cut part cycle time in half.
Aquavision® Di Controller
The Aquavision® Di Controller is the most advanced waterjet motion controller in the industry. Its customized front end guides the user through the process from job set-up to production. Single parts, mirroring, rotation, plate alignment and part arrays (optional) are right at your fingertips. It is fully networkable, allowing part programs to be generated offline and easily transferred to the system’s hard drive for production.
• Industry Leading Precision and Accuracy!
+/- 0.001" Linear positional accuracy (over 12") - per axis
+/- 0.001" Repeatability (bi-directional)
• Sturdy design ensures lasting precision.
• Motion system separated from the catcher tank, eliminating
vibration and ensuring maximum part quality.
• Motion components are protected by metal covers with
brush seals versus bellows that can puncture or tear.
• 300 IPM contouring and 500 IPM rapid positioning (460V)
• Accurate and predictable return to path
• Easy to load with a forklift or crane.
• Cuts virtually anything!
• Optional mirroring - cuts part cycle time in half!
Jet Edge is one of the few waterjet manufacturers willing to custom engineer solutions so you receive a system manufactured to satisfy your specific requirements. Our willingness to customize has made us the go-to waterjet supplier for solving the world’s toughest waterjet problems.
Call us today to discuss a custom solution for your manufacturing challenge!
1-800-JET-EDGE | + 1 763-497-8700
Every Jet Edge water jet system includes unlimited lifetime hands-on training at Jet Edge’s state-of-the art training lab.
Training is free when taken at Jet Edge’s headquarters. You also can arrange to have training at your facility for a fee.
Register for classes online or call 1-800-JET-EDGE (538-3343) or +1 763-497-8700 to schedule custom training sessions for your business.
You must be a Jet Edge customer to be eligible for training.
The Mid Rail Gantry Waterjet System can be powered by any Jet Edge precision waterjet pump. Jet Edge offers the widest range of waterjet pumps in the industry.
AQUAVISION® DI CONTROLLER
WATERJET PARTS AND ACCESSORIES
Jet Edge offers a wide range of parts and accessories to complete your waterjet system, from cutting heads and abrasive delivery systems to closed loop water filtration and abrasive removal systems.
WATERJET SHUTTLE SYSTEMS
Jet Edge can incorporate custom shuttles into your water-only waterjet cutting system so you can keep cutting as parts are unloaded.