FARM-JET® Waterjet System

59" x 59" (1500 mm x 1500 mm). Single 3-axis cutting head.

Designed especially for rural environments with limited electrical service, Jet Edge's FARM-JET® uses a tractor's PTO to produce a 55,000 psi (3800 bar) waterjet capable of cutting parts from virtually any material.

A CUT ABOVE

The FARM-JET waterjet system cuts parts up to 6” thick from virtually any material. It can be configured for both abrasive waterjet cutting and water-only cutting (abrasive is added when cutting hard materials such as metals; soft materials such as foam can typically be cut with water only). It is available for 540 RPM and 1000 RPM PTO shafts and Category 1 and Category 2 three point hitches (tractor supplied by customer). Requires Only 120 V 60 Hz Power Source, Fresh Water Source and Suitable Tractor.

STANDARD FEATURES

• 3-Axis Motion System
Model 1500: 59” x 59” (1500 mm x 1500 mm)
• Jet Edge ECO-JET PTO Direct Drive Waterjet Pump
• Operate with a Windows® PC
• FlashCut Pro-Series Stepper Controller and FlashCut
CNC software
• IGEMS CAD/CAM software

POWER REQUIREMENTS

ECO-JET PTO Pump: 540 or 1000 PRM PTO Shaft; Category 1 or 2 three-point hitch

Waterjet Motion System: 115v 60 Hz or 230v 50Hz

WHY WATERJET
  • Cut Parts from Virtually Any Material
  • No Heat, Flames or Noxious Fumes
  • Fast Setup and Minimal Fixturing
  • Make Needed Parts Now - Why Wait Days or Weeks?
  • Create a New Revenue Source Use Genuine Jet Edge Parts