Spyder Abrasivejet Linear and Pipe Cutting System

The Spyder is an ideal cold-cutting solution for cutting door sheets. Photo courtesy AK Services.

Jet Edge’s Spyder Abrasivejet Cutting System is a portable linear and pipe cutting system designed for use in remote and/or potentially hazardous environments. It is ideal for cutting pipelines, steel reinforced concrete, reactor vessels and fabricated metal structures. The Spyder is a pneumatically controlled mobile waterjet system that moves along rigid, flexible or pipe tracks. Its abrasivejet cutting head can be angled for beveling cuts. An optional radius/circle fixture can be added for increased versatility.

A CUT ABOVE
  • Suitable for any environment.
  • Cuts virtually any material without heat or flames
  • Pneumatic reversible drive motor
  • Non-ferrous motion components Movement Speed: Varies due to several ranges of gear reducers

Track Options:

  • 3, 5 and 10 linear-foot tracks
  • Low profile, rigid and vacuum tracks available
  • Pipe track: 6–60 inches (152–1524 mm)

Optional Radius & Circle Cutting Fixture:

  • 1”-6.5” insider diameter/16“-48” outside diameter
  • 3“-12.5” inside diameter/27.5“-56” outside diameter
SUPPORTING EQUIPMENT
The Spyder includes the Spyder cutting system, abrasivejet, abrasive hopper, abrasivejet mounting hardware, control panel, remote UHP control assembly and hoses.
 
For standard operation, it requires:
  • mobile intensifier pump to supply UHP water
  • Air compressor to supply abrasive hopper
  • Hydraulic power to operate support equipment
  • Track (see specifications for track options)
  • Orifices and nozzles to shape UHP water stream

Mobile Water Jet System Equipment Set Up:

mobile water jet cutting system set up

 

 

 

 

 

 

 

 

 

 

 

 

You may also be interested in our Spyder Radius and Circle Cutting System.

REQUEST INFORMATION

PRODUCT SPECIFICATIONS
Spyder Control Station
 
• Three-position directional valve for pneumatic drive unit
• Dual air regulators for directional speed control
• Control abrasive flow from console
• One palm button shuts off UHP water and abrasive Spyder Vacuum Generator
• Steel construction
• Pneumatic control vacuum
• Locking quick disconnects
• Lightweight compact design
 
Spyder Head Manipulator
  • Drive unit adapts for use with track or pipe cutting bands
  • Pneumatic reversible drive motor with interchangeable gear drive
  • Precise speed control for accurate cutting feed rates
  • Center line mounting of abrasive cutting head
  • Adjustable angle for beveling cuts
Permalign®II Abrasive Head
  • Length 10.94 in (27.8 cm)
  • Weight 4.00 lbs ( 1.8 kg)
  • Operating air pressure (min) 60 psi (4 bar)
  • Water pressure (max) 60,000 psi (4100 bar)
  • Orifice range .003 - .023 in 
  • Nozzle range .020 - .065 ID 
  • Max flow rate 2.1 gpm (7.95 lpm)
High Flow Abrasive Head (for cutting thicker material or multiple layers)
  • Length 7.55 in (19.1 cm)
  • Weight 4.00 lbs ( 1.8 kg)
  • Operating air pressure (min) 60 psi (4 bar)
  • Water pressure (max) 55,000 psi (3800 bar)
  • Orifice range .023 - .042 in 
  • Nozzle range .095 - .125 ID 
  • Max flow rate 5.1 gpm (19.04 lpm)
Spyder Abrasive Delivery System
  • Lightweight durable high-impact poly design
  • Two-wheel pneumatic tires with rugged frame
  • Air-regulated metering valve
  • Delivery rate: up to 3 lb (1.36 kg)/minute
CUSTOM SOLUTIONS

Jet Edge is one of the few waterjet manufacturers willing to custom engineer solutions so you receive a system manufactured to satisfy your specific requirements. Our willingness to customize has made us the go-to waterjet supplier for solving the world’s toughest waterjet problems.

Call us today to discuss a custom solution for your manufacturing challenge!
1-800-JET-EDGE | + 1 763-497-8700