Pipe Cutter ID Downhole Cutting System

Jet Edge's Pipe Cutter ID cuts pipes and casings from the inside in one pass.

The Pipe Cutter ID features Jet Edge's Permalign ID abrasivejet cutting head designed especially for ID pipe cutting.

A centering tool makes it easy to install and ensures an even cut.

The Pipe Cutter ID is adjustable to a maximum cutting depth of 13' (4 m).  It can be customized to reach a 20' (6 m) depth.

Jet Edge's Pipe Cutter ID cuts without heat or flames, making it a safer alternative for oil and gas field applications.

The Pipe Cutter ID is proudly Made in U.S.A.!

Jet Edge’s powerful 60,000 psi (4100 bar) Pipe Cutter ID cuts steel pipes and grouted casing from the inside in one pass.
 
Built for reliable operation in remote locations, the Jet Edge Pipe Cutter ID cuts without heat or flames, making it a safer alternative for oil and gas field applications, including plug and abandonment. Additional applications include cutting pilings and other structures that require downhole cutting.
 
Available in a hydraulic or pneumatic configuration, the Pipe Cutter ID features a circle cutter assembly that mounts to the pipe or casing with a flange plate. A centering tool makes it fast and easy to install and ensures an even cut. Cutting is performed with Jet Edge’s Permalign® ID abrasivejet cutting head which has been designed especially for ID pipe cutting applications.
 
Jet Edge's Pipe Cutter ID is powered by a Jet Edge waterjet intensifier pump.
A CUT ABOVE
  • Cuts without heat or flames!
  • Hydraulic or pneumatic configuration
  • Easy to install and center
  • Cuts through steel pipe and grouted casing in one pass
Product Specifications
Sizes
• 4-14” ID (100-355 mm)
Pipe flange bolt pattern of 10-14 inches (255-355 mm)
• 4-20” ID (100–510 mm)
Pipe flange bolt pattern of 20-30 inches (510-760 mm).
Maximum Operating Depth: 13 foot (4 m)
Can be customized to 20 foot (6 m) depth
 
Permalign ID Abrasive Head
Weight 4 lb (1.8 kg)
Water pressure (max) 60,000 psi (4100 bar)
Max Flow Rate: 4.4 gpm (16.65 lpm) at
55,000 PSI (3800 bar)
Abrasive Delivery (Max): 3 lb (1.36 kg)/minute
Orifice range .014- .030 in (0.35-0.76 mm)
Nozzle ID: 0.045, 0.065 or 0.095 in (1.14, 1.65 or 12.4 mm)
Nozzle Length: 2, 3, or 4 inches (50, 75, 100 mm)
 
• Durable steel design
• Two-wheel pneumatic tires with rugged frame
• Air-regulated metering valve
• Delivery rate: up to 3 lb (1.36 kg)/minute
 
Abrasive
Grit size: 30–200 mesh
Connection: 3/8 inch polyethyene tubing
Flow: 3 lb/min (1.36 kg/min)
Air Supply
Pneumatic configuration:
Pressure: 90–120 psi (6.2–8.3 bar)
Flow: 100 cfm (47 L/s)
Hydraulic configuration:
Pressure: 80–90 psi (5.5–6.2 bar)
Flow: minimal
Environmental
Ambient temperature: 50º–95º F (10º–35º C)
Relative humidity:
Non condensing, maximum 95% at 95ºF (35ºC)
Altitude: Up to 3000 feet (1000 m)
 
Hydraulic Supply
Pressure: 1000 psi (70 bar) nominal; 1500 psi (100 bar) maximum
Flow: 10 gpm (38 L/min)
Hydraulic conguration only
 
60,000 psi (4100 bar) maximum
Required Equipment
• A mobile intensifier pump to supply UHP water
• Air compressor to supply abrasive hopper
• Hydraulic power to operate support equipment (hydraulic configuration only)
• Water source
Orifices and nozzles to shape UHP water stream
CUSTOM SOLUTIONS
Jet Edge is one of the few waterjet manufacturers willing to custom engineer solutions so you receive a system manufactured to satisfy your specific requirements. Our willingness to customize has made us the go-to waterjet supplier for solving the world’s toughest waterjet problems.
 
Call us today to discuss a custom solution for your manufacturing challenge!
1-800-JET-EDGE | + 1 763-497-8700