Print Page

Waterjet Machining Products

Cleaning, Surface Preparation, Mobile Cutting Machines

View All: Cleaning, Surface Preparation, Mobile Cutting Machines

Water Jet Pipe Cutter

Jet Edge's Pipe Cutter is a hydraulically controlled portable abrasivejet cutting system designed especially for cutting pipelines, reinforced concrete and metal structures.

The Pipe Cutter can operate horizontally or vertically. A specially designed track allows the Pipe Cutter to clamp to standard sized pipe (6"-60" diameter) for pipe cutting operations. The Pipe Cutter also can be attached to a variety of tracks for cutting flat or curved surfaces for linear cutting applications.

The Jet Edge Pipe Cutter system includes a Pipe Cutter carriage, hydraulic drive assembly, abrasivejet, abrasive hopper, abrasivejet mounting hardware, control panel, remote UHP control assembly and hoses.

For standard operation, it requires a mobile waterjet intensifier pump to supply UHP water, an air compressor, hydraulic power, track, and orifices and nozzles.

Printer-Friendly Specifications

Mobile Waterjet Systems Brochure

If you are interested in this product, you also may be interested in these products:

Versacutter Abrasivejet System

Spyder Abrasivejet System

INFORMATION REQUEST FORM

Construction

A Cut Above

Suitable for hazardous environments:

Cuts virtually any material without heat or flames!

Track Options:

  • 3, 5 and 10 linear-foot tracks
  • Low profile, rigid and vacuum tracks available
  • Pipe track: 6-60 inches (152-1524 mm)
    Movement Speed:
    Varies due to several ranges of gear reducers

Head Manipulator

Drive unit adapts for use with straightline
track or pipe cutting bands

  • Reversible drive motor with interchangeable gear drive
  • Precise speed control for accurate cutting feed rates
  • Center line mounting of abrasive cutting head
  • Adjustable angle for beveling cuts

Permalign® II Abrasive Head

Length 10.94 in (27.8 cm)
Weight 4.00 lbs ( 1.8 kg)
Operating air pressure (min) 60 psi (4 bar)
Water pressure (max) 60,000 psi (4100 bar)
Orifice range .005 - .021 in (.127 - .53 mm)
Nozzle range .020 - .065 ID (.508 - 1.65 mm)
Max flow rate 2.1 gpm (7.95 lpm)

High Flow Abrasive Head
(for cutting thicker material or multiple layers)

Length 7.55 in (19.1 cm)
Weight 4.00 lbs ( 1.8 kg)
Operating air pressure (min) 60 psi (4 bar)
Water pressure (max) 45,000 psi (3100 bar)
Orifice range .020 - .036 in (.51 - .91 mm)
Nozzle range .095 - .125 ID (2.41 - 3.18 mm)
Max flow rate 5.1 gpm (19.04 lpm)

Abrasive Delivery System

  • Durable steel design
  • Two-wheel pneumatic tires with rigged frame
  • Air-regulated metering valve
  • Delivery rate: up to 3 lb (1.36 kg)/minute

Required Equipment

  • A mobile intensifier pump to supply UHP water
  • Air compressor to supply abrasive hopper
  • Hydraulic power to operate support equipment
  • Track (see track options)
  • Orifices and nozzles to shape UHP water stream

Product Specifications